k3b 사용시 에러사항 발생시

시디 레코딩을 할일이 생겨 이것저것 알아보던중 k3b 라는 프로그램을 알게 되었다.

설치를 하고 실행을 하려는데 갑자기 발생하는 Permision Error….

권한설정 문제이다.

해결을 위해서는

k3bsetup 을 실행하면 된다.

다른 방법으로 해결을 하기 위해서는

따로 cdrom 그룹에 사용자를 추가를 하거나 sudo 를 사용하면 된다.

………..k3bsetup 가 제일 간편한 것 같다.

델 630m 915GM + 17인치 LCD 모니터 듀얼모니터 구성 xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type “man /etc/X11/xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section “Files”
FontPath    “/usr/share/X11/fonts/misc”
FontPath    “/usr/share/X11/fonts/cyrillic”
FontPath    “/usr/share/X11/fonts/100dpi/:unscaled”
FontPath    “/usr/share/X11/fonts/75dpi/:unscaled”
FontPath    “/usr/share/X11/fonts/Type1”
FontPath    “/usr/share/X11/fonts/100dpi”
FontPath    “/usr/share/X11/fonts/75dpi”
# path to defoma fonts
FontPath    “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
EndSection

Section “Module”
Load    “i2c”
Load    “bitmap”
Load    “ddc”
Load    “dri”
Load    “extmod”
Load    “freetype”
Load    “glx”
Load    “int10”
Load    “type1”
Load    “vbe”
EndSection

Section “InputDevice”
Identifier    “Generic Keyboard”
Driver        “kbd”
Option        “CoreKeyboard”
Option        “XkbRules”    “xorg”
Option        “XkbModel”    “pc104”
Option        “XkbLayout”    “us”
Option        “XkbOptions” “grp:caps_toggle,ctrl:nocaps”
EndSection

Section “InputDevice”
Identifier    “Configured Mouse”
Driver        “mouse”
Option        “CorePointer”
Option        “Device”        “/dev/input/mice”
Option        “Protocol”        “ExplorerPS/2”
Option        “Emulate3Buttons”    “true”
EndSection

Section “Device”
Identifier    “Internal Graphics Device”
Driver        “i810”
BusID        “PCI:0:2:0”
Screen        0
Option        “MonitorLayout” “CRT,LFP”
EndSection

Section “Device”
Identifier    “External Graphics Device”
Driver        “i810”
BusID        “PCI:0:2:0”
Screen        1
#    Option        “MonitorLayout” “CRT,LFP”
EndSection

Section “Monitor”
Identifier    “Internal Monitor”
Option        “DPMS”
#        HorizSync    28-64
#        VertRefresh    43-60
EndSection

Section “Monitor”
Identifier    “External Monitor”
Option        “DPMS”
HorizSync    31-80
VertRefresh    60-75
EndSection

Section “Screen”
Identifier    “Internal Screen”
Device        “Internal Graphics Device”
Monitor        “Internal Monitor”
DefaultDepth    24

SubSection “Display”
Depth        24
Modes    “1280×1024” “1280×768” “1280×800” “1024×768” “800×600” “640×480”
EndSubSection
EndSection

Section “Screen”
Identifier    “External Screen”
Device        “External Graphics Device”
Monitor        “External Monitor”
DefaultDepth    24

SubSection “Display”
Depth        24
Modes     “1280×1024” “1280×800” “1152×864” “1024×768” “800×600” “640×480”
EndSubSection
EndSection

Section “ServerLayout”
Identifier    “Default Layout”
Screen        0 “Internal Screen” 0 0
Screen        1 “External Screen” RightOf “Internal Screen”
InputDevice    “Generic Keyboard”
InputDevice    “Configured Mouse”
Option        “Xinerama” “true”
EndSection

Section “DRI”
Mode    0666
EndSection