ubuntu 초기 설치 후 Direct rendering = yes 값 일때의 xorg.conf 파일
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type “man /etc/X11/xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section “Files”
FontPath “/usr/share/X11/fonts/misc”
FontPath “/usr/share/X11/fonts/cyrillic”
FontPath “/usr/share/X11/fonts/100dpi/:unscaled”
FontPath “/usr/share/X11/fonts/75dpi/:unscaled”
FontPath “/usr/share/X11/fonts/Type1”
FontPath “/usr/share/X11/fonts/100dpi”
FontPath “/usr/share/X11/fonts/75dpi”
FontPath “/usr/share/fonts/X11/misc”
# path to defoma fonts
FontPath “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
EndSection
Section “Module”
Load “i2c”
Load “bitmap”
Load “ddc”
Load “dri”
Load “extmod”
Load “freetype”
Load “glx”
Load “int10”
Load “type1”
Load “vbe”
EndSection
Section “InputDevice”
Identifier “Generic Keyboard”
Driver “kbd”
Option “CoreKeyboard”
Option “XkbRules” “xorg”
Option “XkbModel” “pc105”
Option “XkbLayout” “us”
Option “XkbOptions” “lv3:ralt_switch”
EndSection
Section “InputDevice”
Identifier “Configured Mouse”
Driver “mouse”
Option “CorePointer”
Option “Device” “/dev/input/mice”
Option “Protocol” “ExplorerPS/2”
Option “ZAxisMapping” “4 5”
Option “Emulate3Buttons” “true”
EndSection
Section “InputDevice”
Identifier “Synaptics Touchpad”
Driver “synaptics”
Option “SendCoreEvents” “true”
Option “Device” “/dev/psaux”
Option “Protocol” “auto-dev”
Option “HorizScrollDelta” “0”
EndSection
Section “InputDevice”
Driver “wacom”
Identifier “stylus”
Option “Device” “/dev/wacom” # Change to
# /dev/input/event
# for USB
Option “Type” “stylus”
Option “ForceDevice” “ISDV4” # Tablet PC ONLY
EndSection
Section “InputDevice”
Driver “wacom”
Identifier “eraser”
Option “Device” “/dev/wacom” # Change to
# /dev/input/event
# for USB
Option “Type” “eraser”
Option “ForceDevice” “ISDV4” # Tablet PC ONLY
EndSection
Section “InputDevice”
Driver “wacom”
Identifier “cursor”
Option “Device” “/dev/wacom” # Change to
# /dev/input/event
# for USB
Option “Type” “cursor”
Option “ForceDevice” “ISDV4” # Tablet PC ONLY
EndSection
Section “Device”
Identifier “Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller”
Driver “i810”
BusID “PCI:0:2:0”
EndSection
Section “Monitor”
Identifier “Generic Monitor”
Option “DPMS”
EndSection
Section “Screen”
Identifier “Default Screen”
Device “Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller”
Monitor “Generic Monitor”
DefaultDepth 24
SubSection “Display”
Depth 1
Modes “1280×800”
EndSubSection
SubSection “Display”
Depth 4
Modes “1280×800”
EndSubSection
SubSection “Display”
Depth 8
Modes “1280×800”
EndSubSection
SubSection “Display”
Depth 15
Modes “1280×800”
EndSubSection
SubSection “Display”
Depth 16
Modes “1280×800”
EndSubSection
SubSection “Display”
Depth 24
Modes “1280×800”
EndSubSection
EndSection
Section “ServerLayout”
Identifier “Default Layout”
Screen “Default Screen”
InputDevice “Generic Keyboard”
InputDevice “Configured Mouse”
InputDevice “stylus” “SendCoreEvents”
InputDevice “cursor” “SendCoreEvents”
InputDevice “eraser” “SendCoreEvents”
InputDevice “Synaptics Touchpad”
EndSection
Section “DRI”
Mode 0666
EndSection
