/etc/apt/sources.list 파일 소스리스트 참고 위키
http://ubuntu.or.kr/wiki.php/%EC%86%8C%EC%8A%A4%EB%A6%AC%EC%8A%A4%ED%8A%B8
/etc/apt/sources.list 파일 소스리스트 참고 위키
http://ubuntu.or.kr/wiki.php/%EC%86%8C%EC%8A%A4%EB%A6%AC%EC%8A%A4%ED%8A%B8
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type “man /etc/X11/xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section “Files”
FontPath “/usr/share/X11/fonts/misc”
FontPath “/usr/share/X11/fonts/cyrillic”
FontPath “/usr/share/X11/fonts/100dpi/:unscaled”
FontPath “/usr/share/X11/fonts/75dpi/:unscaled”
FontPath “/usr/share/X11/fonts/Type1”
FontPath “/usr/share/X11/fonts/100dpi”
FontPath “/usr/share/X11/fonts/75dpi”
# path to defoma fonts
FontPath “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
EndSection
Section “Module”
Load “i2c”
Load “bitmap”
Load “ddc”
Load “dri”
Load “extmod”
Load “freetype”
Load “glx”
Load “int10”
Load “type1”
Load “vbe”
EndSection
Section “InputDevice”
Identifier “Generic Keyboard”
Driver “kbd”
Option “CoreKeyboard”
Option “XkbRules” “xorg”
Option “XkbModel” “pc104”
Option “XkbLayout” “us”
Option “XkbOptions” “grp:caps_toggle,ctrl:nocaps”
EndSection
Section “InputDevice”
Identifier “Configured Mouse”
Driver “mouse”
Option “CorePointer”
Option “Device” “/dev/input/mice”
Option “Protocol” “ExplorerPS/2”
Option “Emulate3Buttons” “true”
EndSection
Section “Device”
Identifier “Internal Graphics Device”
Driver “i810”
BusID “PCI:0:2:0”
Screen 0
Option “MonitorLayout” “CRT,LFP”
EndSection
Section “Device”
Identifier “External Graphics Device”
Driver “i810”
BusID “PCI:0:2:0”
Screen 1
# Option “MonitorLayout” “CRT,LFP”
EndSection
Section “Monitor”
Identifier “Internal Monitor”
Option “DPMS”
# HorizSync 28-64
# VertRefresh 43-60
EndSection
Section “Monitor”
Identifier “External Monitor”
Option “DPMS”
HorizSync 31-80
VertRefresh 60-75
EndSection
Section “Screen”
Identifier “Internal Screen”
Device “Internal Graphics Device”
Monitor “Internal Monitor”
DefaultDepth 24
SubSection “Display”
Depth 24
Modes “1280×1024” “1280×768” “1280×800” “1024×768” “800×600” “640×480”
EndSubSection
EndSection
Section “Screen”
Identifier “External Screen”
Device “External Graphics Device”
Monitor “External Monitor”
DefaultDepth 24
SubSection “Display”
Depth 24
Modes “1280×1024” “1280×800” “1152×864” “1024×768” “800×600” “640×480”
EndSubSection
EndSection
Section “ServerLayout”
Identifier “Default Layout”
Screen 0 “Internal Screen” 0 0
Screen 1 “External Screen” RightOf “Internal Screen”
InputDevice “Generic Keyboard”
InputDevice “Configured Mouse”
Option “Xinerama” “true”
EndSection
Section “DRI”
Mode 0666
EndSection
데비안 위키
http://debianusers.org/DebianWiki/wiki.php/Mplayer
우분투 위키
http://ubuntu.or.kr/wiki.php/RestrictedFormats#s-5.1
데비안 위키에서는 설치법을, 우분투 위키에서는 코덱설치법을 보면 좋다.
/etc/apt/source.list 수정
deb http://ko.archive.ubuntu.com/ubuntu/ edgy multiverse
혹은
deb http://ko.archive.ubuntu.com/ubuntu/ edgy multiberse, universe
adept 에서 다음의 패키지들을 설치:
libxine-extracodecs
kdemultimedia-arts-mad
xine-mad
amarok-xine
gstreamer0.8-mad
이후 x서버 재시작 (혹은 amarok 재시작)
그리고 amaroK 설치 이후 아무것도 건드려 주지 않으셨다면 보통은 사운드 출력엔진이 xine 엔진으로 설정이 되어 있을 것이지만, 혹시라도 안되시는 분들은 amaroK 실행해 주신 다음 설정(&S) -> amaroK 설정(&C) 가셔서 엔진을 xine 엔진으로 면 됨.
구글이나 다른 웹 사이트에서 검색해 보니 libxine-extracodecs 를 받으라고 되어 있던데 apt-get 으로 다운로드를 시도할 경우 의존성이 걸리면서 정상적으로 설치가 되지 않는 경우가 많음.
실력이 부족한 탓에 자쭈 컴퓨터만 고생한다.
그래도…처음에 비하면 괄목상대할 정도이니..정말 기쁘기 그지없다.
데탑은…이정도면 충분하지 않을까나..